Archives

MistKing Misting Systems

Posted by in Lizards, Equipment, General Reptile, Coast to Coast Exotics, Amphibians on May 03, 2017 . 0 Comments.

MistKing

For the last decade, MistKing® have engineered the worlds most advanced misting systems which have enhanced the keeping and breeding of reptile and amphibians for hobbyists and zoos across the globe.

The MistKing® systems are renowned for their ultra-quiet pumps, incredibly fine mist and  long-life performance. Many keepers still have systems which have been running over a decade.

Starter Misting System £169.99

This Starter Misting System v4.0 includes:

 

 

24V DC misting pump

 

Pump power adapter

 

1 Value L misting assembly

 

Reservoir bulkhead with O-ring and plug

 

15 feet of 1/4” black opaque tubing

 

Digital Seconds Timer ST- 24 - with instructions

 

5 tubing clips with screws

 

Reference manual

 

 

Ultimate Misting System £299.99

 

This Ultimate Misting System v4.0 includes:

24V DC misting pump

Pump power adapter

3 Value T misting assemblies

ZipDrip

Reservoir bulkhead with O-ring and plug

25 feet of 1/4” black opaque tubing

1/4” Manual Ball Valve

Digital Seconds Timer ST-24

10 tubing clips with screws

Tubing cutter with collet tool

 “T” connector

 “L” connector

Cable Y-connector for connecting the ZipDrip valve and pump together to the timer

 

Advanced Misting System £569.99

 

 

This Advanced Misting System v4.0 includes:

Large capacity diaphragm pump with 3/8” fittings

24V Power adapter - 110V

3/8” reservoir bulkhead with plug

3/8” Ball Valve

35 feet of 1/4” black opaque tubing

15 feet of 3/8” black opaque

12 Value “T” Misting Assemblies

3 Value “L” Misting Assemblies

2 Reducing Tee Connections (3/8” to 1/4”)

1 Reducing Elbow Connections (3/8” to 1/4”)

20 1/4” Tubing Clips

10 3/8” Tubing Clips

Seconds timer ST-24

Installation instructions

 

 

Accessories

 

All accessories shown come in retail blister card packaging with ability to hang on your retail shelving.

 

Code: MKTC1

Description: TUBING CUTTER £8.99

 

 

Make perfect cuts every time with this nifty tube cutter. Cuts at perfect 90 degree angles without bending the tubing. Cutter closes for safe storage. It also features a collet depresser on the back to easily press on collets while removing the tubing. This little tool makes installation much easier. Make every cut a perfect one

 

 

 

Code: MK-ZDVal

Description: ZIP DRIP VALVE £32.99

 

Zip Drip Valve. Plug this valve into your pump AC/DC adapter and you’ll transform your existing System into a totally drip less one. Comes with Y-connector. ZipDrip connects between the reservoir and the pump. Select what tubing size you have between the reservoir and the pump. Starter and Ultimate system are based on 1/4” and Advanced system uses a 3/8” feed to the pump.

 

 

Code: MK14P1

Description: 1/4 PUMP FITTINGS 2PCS PER PACK £9.99

 

Replacement fitting that can be used on any MistKing Starter or Ultimate pumps. 3/8” NPT male on one threaded end and 1/4” push to connect fitting on the other end. Made of nickel plated brass, this fitting is highly durable. Push to connect for easy tube removal. Do not

purchase this fitting for Advanced pumps

 

 

Code: Val14T1

Description: 1/4 UNION TEE £3.29

 

Value 1/4 inch Tee. Ideal for splitting tubing into 2 directions. Connect multiple T connectors together and make a custom manifold.

 

 

Code: Val14EL

Description: 1/4 UNION ELBOW £3.29

 

 

Value 1/4 inch elbow. Perfect for going around tight corners.

 

 

 

Code: Val14Y

Description: 1/4 Y UNION £4.31

 

Value 1/4 inch Y union. Ideal for splitting tubing into 2 directions.

 

 

 

Code: Val14PT1 £7.99

Description: 1/4 PLUG IN TEE

 

 

Value 1/4 inch Plug In Tee.

 

 

 

Code: Val14PEL1 £7.99

Description: /4 PLUG IN ELBOW

 

Value 1/4 inch plug in elbow.

 

 

 

Code: Val14BV1 £5.99

Description: 1/4 BALL VALVE

 

 

Value 1/4 inch Valve.

 

 

 

Code: Val14FF £10.99

Description: 1/4 FEMALE UNION 3 PACK

 

Value Straight 1/4 Female to Female Union.

 

 

 

Code: Val14MM £6.99

Description: 1/4 MALE UNION 3 PACK

 

 

Value Straight 1/4 Male to Male Union. Perfectly rounded

corners, fits perfectly snug around the collets.

 

 

 

Code: Val14RunT1 £7.99

Description: PLUG-IN RUN TEE

 

Value 1/4 inch Plug In Run Tee Union.

 

 

 

Code: ValCol £3.29

Description: COLLETS & LOCKS 10 PACK

 

Value 1/4 inch collets & collet Locks. These are good to keep as spares in case anything would happen to a connection which may cause leakage.

 

 

 

Code: TC14 £4.79

Description: 1/4 TUBING CLIPS & SCREWS

 

Secure the 1/4” tubing with nylon clips. Perfectly sized for use with the 1/4” tubing. Use a nail or a screw to secure in place. Sold in Packs of 10 pcs.

 

 

 

Code: VALPNR £9.99

Description: 3/8 TO 1/4 REDUCER 2 PACK

 

Value 3/8” to 1/4” plug-in reducer. Under some circumstances can be useful. Do not purchase to convert an advanced pump to 1/4”. Used to connect 1/4” tubing

to a 3/8” connection.

 

 

 

Code: Val38T12 £4.99

Description: 3/8 UNION TEE

 

Value 3/8 inch Tee. Ideal for splitting tubing into 2 directions. Connect multiple T connectors together and make a custom manifold

 

 

 

Code: Val38EL2 £4.99

Description: 3/8 UNION ELBOW

 

 

Value 3/8 inch elbow. Perfect for going around tight corners.

 

 

 

Code: Val38BH3 £7.99

Description: 3/8 BULKHEAD ASSEMBLY

 

 

Value 3/8 inch Bulkhead. Includes an O-ring.

 

 

Code: Val38BV12 £8.99

Description: 3/8 BALL VALVE

 

 

Value 3/8 inch Ball Valve.

 

 

 

Code: MK38P1 £9.99

Description: 3/8 PUMP FITTINGS 2PCS PER PACK

 

Replacement fitting for use with Advanced pumps. Advanced pumps going over 20 nozzles must have 3/8” fittings like this one on both of the ports. 3/8” NPT male on one end and 3/8” push to connect fitting on the other end. Made of nickel plated brass, this fitting is highly durable. Push to connect for easy tube removal.

 

 

 

Code: Val38-14-T £6.29

Description: 3/8 TO 1/4 REDUCING TEE

 

Specialty 3/8” to 1/4” reducing Tee. It has great uses when designing larger systems with a 3/8” backbone. Two ports fit 3/8” tubing and middle port fits 1/4” tubing

 

Code: Val38-14-L £6.29

Description: 3/8 TO 1/4 REDUCING ELBOW

 

Specialty 3/8” to 1/4” reducing elbow. It has great uses when designing larger systems with a 3/8” backbone

 

 

 

Code: MK3815 £9.99

Description: 3/8 TUBING 15 FEET

 

Need extra 3/8 inch polyethylene close tolerance tubing? Tubing is black opaque and doesn’t let light through, preventing algea growth. Rated up to 250psi. This tubing is used to connect the reservoir to the pump. You can also use it to connect the pump to a manifold before splitting off with the 1/4” tubing to individual nozzles.

 

 

 

Code: TC38 £4.69

Description: 3/8 TUBING CLIPS & SCREWS

 

Secure the 3/8” tubing with nylon clips. Perfectly sized for use with the 3/8” tubing. Use a nail or a screw to secure in place. Sold in Packs of 10 pcs.

 

 

Code: MKVNDT £27.99

Description: DOUBLE MISTING NOZZLE T

Equipped with exclusive black low flow and check valved nozzles. Compatible with all MistKing misting assemblies. Mix and match style and value. Ideal for smaller tanks where it’s not worth it to put 2 nozzles next to each other.

 

 

Code: MKVNDL £27.99

Description: DOUBLE MISTING NOZZLE L

Equipped with exclusive black low flow and check valved nozzles. Compatible with all MistKing misting assemblies. Mix and match style and value. Ideal for smaller tanks where it’s not worth it to put 2 nozzles next to each other.

 

 

 

Code: MKVNT £19.99

Description: SINGLE MISTING NOZZLE T

 

Equipped with exclusive black low flow and check valved nozzles. Compatible with all MistKing misting assemblies. Mix and match style and value.

 

 

 

Code: MKVNL £19.99

Description: SINGLE MISTING NOZZLE L

 

Equipped with exclusive black low flow and check valved nozzles. Compatible with all MistKing misting assemblies. Mix and match style and value

 

 

 

Code: MK1425 £11.99

Description: 1/4 TUBING 25 FEET

 

Need extra 1/4 inch polyethylene close tolerance tubing? Order as much as you need and take extra - you’ll be glad you did! Tubing is black opaque and doesn’t let light through, preventing algae growth. Rated up to 250psi. This is the tubing used in all MistKing misting systems and is used to connect the nozzles with each other.

 

 

 

Code: MKVWG £6.29

Description: MOUNTING WEDGE BRACKET

 

Screen wedge made out of black plastic. Precision moulded to perfect 90 degrees, ideal for mounting adjustable nozzles in screen vivarium tops (ie. chameleon

enclosures). 4 counter sunk mounting holes drilled on the sides and one hole drilled in the middle for the misting assembly. Available for value nozzles only.

 

 

 

Code: Val14BH £4.99

Description: 1/4 BULKHEAD ASSEMBLY

 

Value 1/4 inch Bulkhead. Includes an O-ring.

 

 

 

Code: MKST-24 £54.99

Description: ST-24 SECONDS TIMER

 

Mistking timer with up to 10 programmable events per day to both set start time and duration of misting. Works only with MistKing Misting Systems.

 

 

 

Code: MKHT-24 £109.99

Description: HT-24 HYGROSTAT/THERMOMETER

 

New product that works with any existing MistKing system. This controller works by constantly monitoring humidity on the probe. Set a day time and night time humidity level and HT-24 will activate the misting system as needed. Excellent choice when desired humidity needs to be achieved. It plugs directly into the 24V misting system power and not into an electrical outlet. As with any humidity probe based controller ensure that you

do not spray directly onto it as it will give you unreliable performance.

 

 

 

Code: MKRCT-24 £62.99

Description: RCT-24 REPEAT CYCLE TIMER

Repeat Cycle Timer is the ideal choice for aeroponic and other growers. You can now control misting with separate repeating ON and OFF intervals for day and night. This repeat cycle timer goes beyone flexible. While many other RCT rely on a photo cell to switch from day to night mode, we use the timers internal clock to accurately specify when the switch should occur. This is much more precise. In addition you can configure exact day and night mode starts.

 

Example programme:

Mist 5 sec every 2 minutes during the day & mist 10 sec every 20 min at night.

 

Tags: mistking, mist, spray system, spraying, humidity, frogs Last update: May 03, 2017

Comments

Leave a Comment

Leave a Reply

* Name:
* E-mail: (Not Published)
   Website: (Site url with http://)
* Comment:
View Mobile / Standard Payments powered by Worldpay

Registered name: Coast to Coast Exotics Ltd
Registered Office: 124 North Road, Darlington, County Durham, DL1 2EJ
Company registered in England & Wales
Tel 01325 283756 | Fax 01325 255060 | Opening hours Monday to Saturday 10 til 5. Sunday 11 til 3
Company Number: 5374733 | VAT Registered: 675 2011 52

Site Powered by EasyShop Ecommerce CMS